Non-contacting Gas Seal for Turbo Compressors Features– Cartridge design- Unidirectional or bidirectional capability- Single, double-opposed or tandem configuration- Robust design with unparalleled field-proven pedigree ParametersTEMPERATURE LIMITS : -220°F to 600°F/-140°C to 315°C, dependent on overall duty conditionsPRESSURE LIMITS : 6,500 psi(g)/450 bar(g) across single stageSPEED LIMITS : 660fps/200m/sSIZE LIMITS : 13.75″/350mm Recommended Applications– Centrifugal Compressors- Other Compressors For more information…
Non-contacting Gas Seal for Steam Turbines Features- Bearing oil steam contamination reduced.- Standard designs fit most single-stage turbines.- Reduced noise levels and hazards associated with leaking steam.- Support equipment eliminated.- Unidirectional and bidirectional capability. ParametersTEMPERATURE LIMITS : 40°F to 500°F/-40°C to 260°CPRESSURE LIMITS : 400 psi(g)/27.6 bar(g)SPEED LIMITS : 400fps/122m/sSIZE LIMITS : 6.5″/165mm Recommended Applications- Steam Turbines- Driven…
Universal Cartridge™ Seal Family — Single Cartridge Elastomer Bellows Seal Features– The Type 5611 single cartridge seal arrangements incorporate the John Crane Type 1 seal head assembly with universal cartridge adaptive hardware.- Automatic adjustment compensates for abnormal shaft-end play and run-out, primary ring seal face wear, equipment tolerances and service life.- Non-clogging single-coil spring.- Positive mechanical…
Separation Seal (Non-contacting Technology) Features– Non-contacting for longer life and improved reliability, low heat generation.- Runs at low operating pressure differential enabling low gas consumption.- Specially designed segments further minimize gas consumption.- Universal design, independent of shaft rotation.- Will retrofit many traditional carbon bushing rings.- Suitable for running with nitrogen separation gas irrespective of dew point.-…
Fully Unitized, Heavy-duty Elastomer Bellows Shaft Seal Features– Unitized construction allows for fast and easy installation and replacement. Design fits DIN24960, ISO 3069 and ANSI B73.1 M-1991 standards.- Innovative bellows design is pressure-supported and will not crease or fold under high pressure.- Non-clogging, single-coil spring keeps seal faces closed and properly tracking during all phases of…
Non-contacting Gas Seal for Turbo Compressors Features– Cartridge design- Unidirectional or bidirectional capability- Single, double-opposed or tandem configuration- Robust design with unparalleled field-proven pedigree ParametersTEMPERATURE LIMITS : -220°F to 600°F/-140°C to 315°C, dependent on overall duty conditionsPRESSURE LIMITS : 6,500 psi(g)/450 bar(g) across single stageSPEED LIMITS : 660fps/200m/sSIZE LIMITS : 13.75″/350mm Recommended Applications– Centrifugal Compressors For more information about…
