Similar Posts
Type 502
Unitized Elastomer Bellows Seal Features– Full convolution elastomeric bellows seal designed to fit into confined spaces including DIN24960.- Unitized for ease of installation and tolerant of shaft play and run-out.- Bi-directional and robust drive to the seal face eliminates stresses on the bellows.- Available in metric sizes from 14mm to 100mm. ParametersTEMPERATURE LIMITS : -40°F to 400°F/40°C…
Type 28EXP
Non-contacting Gas Seal for Turbo Compressors Features– Cartridge design- Unidirectional or bidirectional capability- Single, double-opposed or tandem configuration- Robust design with unparalleled field-proven pedigree ParametersTEMPERATURE LIMITS : -220°F to 600°F/-140°C to 315°C, dependent on overall duty conditionsPRESSURE LIMITS : 6,500 psi(g)/450 bar(g) across single stageSPEED LIMITS : 660fps/200m/sSIZE LIMITS : 13.75″/350mm Recommended Applications– Centrifugal Compressors For more information about…
Type 93FR
Separation Seal (Non-contacting Technology) Features– Non-contacting for longer life and improved reliability, low heat generation.- Runs at low operating pressure differential enabling low gas consumption.- Specially designed segments further minimize gas consumption.- Universal design, independent of shaft rotation.- Will retrofit many traditional carbon bushing rings.- Suitable for running with nitrogen separation gas irrespective of dew point.-…
Type 2100
Fully Unitized, Heavy-duty Elastomer Bellows Shaft Seal Features– Unitized construction allows for fast and easy installation and replacement. Design fits DIN24960, ISO 3069 and ANSI B73.1 M-1991 standards.- Innovative bellows design is pressure-supported and will not crease or fold under high pressure.- Non-clogging, single-coil spring keeps seal faces closed and properly tracking during all phases of…
Type 5611
Universal Cartridge™ Seal Family — Single Cartridge Elastomer Bellows Seal Features– The Type 5611 single cartridge seal arrangements incorporate the John Crane Type 1 seal head assembly with universal cartridge adaptive hardware.- Automatic adjustment compensates for abnormal shaft-end play and run-out, primary ring seal face wear, equipment tolerances and service life.- Non-clogging single-coil spring.- Positive mechanical…
Type 28VL
Non-contacting Gas Seal for Vaporizing Liquids Features– Extended wear life- Outstanding reliability- Reduced power consumption- Zero process contamination- Reduced emissions ParametersTEMPERATURE LIMITS : -40°F to 400°F/40°C to 204°CPRESSURE LIMITS : 1800 psi(g)/124 bar(g) per seal faceSPEED LIMITS : 590fps/180m/sSIZE LIMITS : 11″/280mm Recommended Applications– Process Pumps- Other Rotating Equipment For more information about this product, please visit:https://www.johncrane.com/products/mechanical-seals/dry-gas/type-28vl